SMTCL CNC Machine Tool Maintenance Regulations

Clean the processing area

★ Explanation: Clean the surface of the workbench, T-groove, and exposed surfaces of the machining area that are prone to residue and debris until there is no accumulation of cutting fluid and debris. Apply guide rail oil to the workbench and T-groove for rust prevention.

Three-axis lubrication

★ Description: Run the three-axis lubrication program empty, slow down the feed rate to 20%, and during operation, lubricate the lubrication oil pump 3-5 times.

Clean the knife magazine and handle

★ Description: Remove all tool handles from the tool magazine, clean the cutting fluid and debris from the tool magazine and handle, and soak the tool handles in a container containing guide rail oil.

Clean the spindle

★ Instructions: Clean the bottom of the spindle, use a spindle cleaning rod to clean the taper hole, and then apply guide rail oil to prevent the taper hole from rusting.

Move the three-axis to the middle position and turn off the power

★ Description: Run the X, Y, and Z axes to the middle position of each axis stroke, close the machine door, press the emergency stop button, and then shut down the system, completely cutting off the power and gas sources.

Maintenance of electrical box and oil cooler

★ Instructions: Disassemble the filter cotton and oil cooler filter screen of the electrical box for cleaning, clean the machine tool filter cup, blow the filter cover plate of the electrical box clean with an air gun, wait for the filter cotton and filter screen to dry, and reinstall them. Place a moisture-proof box or desiccant inside the electrical box to prevent moisture from burning out electrical components when the power is turned on next time.